An Exterior Insulation and Finish System
Outsulation® System
Outsulation® Plus MD System
Outsulation® RMD
Outsulation HDCI system.... High Durability Continuous Insulation
Outsulation® LCMD Systems 1-5
Outsulation® MD System®
Outsulation® PE System™
Outsulation® X System
An Exterior Insulation and Finish System with Continuous Insulation
High Durability Continuous Insulation
An Exterior Insulation and Finish System With Engineered Moisture Drainage That Incorporates Continuous Insulation and An Air/Water-Resistive Barrier
Outsulation Plus® System
Outsulation PD® System
Cement Board MD™
Textured Acrylic Finishes (TAFS™)
TAFS™ over ICF
Metalite 8000
Metalite 3100
Fedderlite
Fedderlite M
Fedderlite MP
Outsulite System
Outsulite® Securock® ExoAir® 430
A complete stucco assembly for residential and commercial buildings.
Dryvit® architectural shapes can add a stately, classical architecture aesthetic to any building — without the structural demands, material weight, labor requirement, or environmental impacts of actual stonework.
Dryvit architectural shapes are compatible with most Dryvit specialty finishes, Modulite™ panelization systems, and Tremco sealants and adhesives — giving you a world of colors, textures and finishes to create the exact aesthetic you envision for your structure.
Noncementitious Adhesives for EPS.
An Acrylic Co-Polymer, Water-Resistant Base Coat and Adhesive
A factory blended mixture of dry polymers and Portland cement
Acrylic-Modified, Fiber-Reinforced Adhesive, Base and Leveling Coat
Dry Mix, Polymer-Modified, Cementitious, Fiber-Reinforced Adhesive and Base Coat
Sprayable, Dry Mix, Polymer-Modified, Cementitious Fiber-Reinforced Adhesive and Base Coat
A Tintable, Noncementitious Base Coat for Embedding Reinforcing Mesh and Providing a Grout Coat for Custom Brick™ Finishes
Acrylic-Modified Adhesive and Base Coat
Dry Mix, Polymer-Modified, Cementitious Adhesive and Base Coat
Fast Setting, Cement-Based, Dry-Blend Adhesive and Base Coat
Fast Setting, Non-Sagging, Patching Material
A 2-Pass Base Coat Which Improves Impact Resistance and Provides Protection from Woodpecker Damage for EIFS Substrates
A Liquid-Applied Transition Membrane for Sealing Rough Openings at Windows, Doors and Other Wall Penetrations
Sprayable, Single Step Water-Resistive Membrane/Air Barrier and Adhesive
A Liquid Applied Flashing Membrane and Joint Filler
A Liquid Applied, Water-Resistive Membrane, Air Barrier and Class I Vapor Retarder
A High Performance, Polymer-Based, Noncementitious Water-Resistive Membrane and Air Barrier
A high performance, non-cementitious water-resistive membrane and air barrier. Available in Canada only
Exterior/Interior, Stain Resistant, High Performance, Acrylic Architectural Coating
Demandit Sanded is a 100% acrylic coating, which is offered in a variety of standard and custom colors.
Demandit Smooth is a 100% acrylic coating, which is offered in a variety of standard and custom colors.
Exterior Acrylic Coating with Hydrophobic Properties
Proven Mildew Resistant Finishes and Coatings for Demanding Building Environments
Fade resistance is backed by a 5-year warranty – regardless of color!
100% Acrylic Custom Antique Stain
High Performance Acrylic Weatherproofing Coatings
Expanded Polystyrene Insulation Board is affixed to the substrate and creates a layer of continuous insulation.
DOW™ XNERGY™ rigid insulation is key to the system’s excellent energy efficiency, durability and moisture resistance.
Flexible, Elastomeric Exterior Finishes
Flexible, Waterproof Elastomeric Exterior Coating
100% Acrylic Coating Providing a Pearlescent Appearance
Ready-To-Use Smoothing Material for Dryvit Base Coat
An Acrylic Admixture for Portland Cement Mixes
Pigmented Acrylic Primer For Dryvit Finishes
Water-based, acrylic, semi-transparent primer
A Flexible Mat 1/8 in (3.2 mm) Thick for Use With the Outsulation® LCMD Systems 1-5 or the Outsulation® RMD System
A Polyethylene Spacer for Use with the Cement Board MD System®
Dryvit Vent Assembly™, Starter Strip™, Track, Vent Track™, Drainage Track and Drainage Strip™
Acrylic-Based Primer with Sand
Primer/Adhesion Promoter
Sealing new applications of EIFS to provide increased resistance to dirt pickup.
Color-Tinted Acrylic Primer For Weatherlastic Finishes
Glass Fiber Mesh For Reinforcing Dryvit Base Coats
100% Acrylic-Based Finish with Multi-Colored Quartz Aggregates
Templated Finish Resulting in a Brick Appearance
A Smooth 100% Acrylic-Based Dirt Pickup Resistance Finish
100% Acrylic-Based Finish with the Appearance of Limestone Blocks
Exterior and Interior Quartz Aggregate Finish
100% Acrylic-Based Finish with Large Mica Chips and Multi-Colored Quartz Aggregates
A 100% Acrylic-Based Finish with the Appearance of Travertine Stone
NewBrick® offers the industry a way to build more cost and energy efficient traditional looking buildings from the ground up in a faster and simpler way.
"Original" Aggregate Textured 100% Acrylic-Based Dirt Pickup Resistance Finishes. Quarzputz®, Sandblast®, Freestyle®, Sandpebble®, and Sandpebble® Fine.
Patented, Aggregate Textured 100% Acrylic-Based Dirt Pickup Resistance Lightweight Finishes. Quarzputz® E, Sandpebble® E and Sandpebble® Fine E
Modern and elegant water-based specialty finish that duplicates the well-known effect of rusting metal or steel with distinct oxidation features.
Textured 100% Acrylic Finishes With Hydrophobic Properties. Quarzputz® HDP, Sandblast® HDP, Sandpebble® HDP, Sandpebble® Fine HDP, and Lymestone™ HDP.
StucCoat is an integrally -colored, acrylic copolymer finish specifically designed to provide texture and color over Portland cement plaster, cast-in-place, pre-cast and concrete masonry units. It is not intended for use with an Outsulation system.
Proven Mildew Resistant Finishes and Coatings for Demanding Building Environments. Dryvit PMR finishes are available in eight textures: Quarzputz®, Quarzputz® E, Sandblast®, Freestyle®, Sandpebble®, Sandpebble® E, Sandpebble® Fine and Sandpebble® Fine E. Two smooth specialty coatings, Demandit® and Weathercoat™ are also available.
The look and feel of wood, the performance of Dryvit™
Traditional papers and wraps create obvious paths for moisture to reach-and compromise- the substrate. Our seamless, liquid applied air and water-resistive barriers stop moisture in its tracks, keeping your substrate protected. Whether you are applying it under an Outsulation® system or a non-EIFS wall assembly, we've got your building substrate covered!
Trowel Apply
Roller Apply
Sealing Buildings Tight
Applied Over Brick
Used to protect openings
The best way to understand how our seamless, liquid-applied air and water-resistive barrier products work is to see how it is applied to the wall. The videos below speak for themselves.
The United States Army Corps of Engineers is the most stringent organization in the U.S. when it comes to upholding air-tightness standards in building design and construction.
From concept to completion, the construction of Liberty Center was no easy feat. At 1.2 million square feet, the mixed-use megaplex was designed by architect KA, Inc. to appear as if it were a series of distinct buildings with different facades – similar to how a city block might develop over time.
Backtop NT Smooth and Texture: A High Performance, Noncementitious Water-Resistive Membrane and Air BarrierAquaFlash: A water-resistant flashing system consisting of a liquid adhesive and a polyester tape for use at wall openings
The extraordinary design flexibility of the Dryvit Outsulation® system is what distinguishes it from all other exterior cladding choices. You want your building to be brick? Check. Granite? Check. Metal panel? Got that too. And in just about any color under the rainbow. Finally, by easily adding decorative shapes the architect can recreate classic architecture at a cost far more affordable than with traditional building materials. Or even create the next design standard!
Cincinnati, OH
Stevensville, MD
Stamford, CT
Greensboro,SC
Minneapolis, MN
Atlanta, GA
The following case studies illustrate how finishes and shapes from Dryvit play an integral role in increasing curb appeal and building value. And with our incredible range of colors available, we can provide an exterior appearance to suit any aesthetic or corporate brand standard.
Developer Raj Patel had long wanted to put up a hotel near Hartsfield-Jackson Atlanta International Airport for the obvious reason: “It is the busiest airport in the world.” In 2014, Patel’s company, Rossmore Management Group, achieved that goal, opening the doors in September to the 122-room Homewood Suites by Hilton Atlanta Airport North in the city of East Point north of the big airport.
A 5,000 sq. ft. Dryvit Outsulation® wall assembly accentuated by approximately 900 square feet of panels coated with Reflectit™ – an acrylic coating that looks like aluminum panels – proved to be just the right touch for the façade of a TGI Fridays restaurant recently constructed in Fairview Heights, IL, a suburb of St. Louis.
Design flexibility is critical to architects and specifiers. Dryvit’s many textures and colors offer design freedom at a price the building owner can afford. Listen to these building professionals talk about how Dryvit’s Reflectit coating enabled them to get the look of metal panels with all of the benefits of an Outsulation system.
Podium design utilizes multiple stories of wood framing over a concrete deck, making it popular for Type IIIB construction. Why are Dryvit’s Outsulation systems ideal for podium design?• Compliant with ASTM E 119 for load bearing wood framed wall assemblies• Compliant with the requirements of NFPA 285 when installed over a wall constructed with wood studs• Proven to compress the construction schedule when compared to other claddings• Integrated air/water-resistive barrier• Integrated continuous insulation • Vast array of exterior aesthetics, including brick, stone, metal panels, stucco, and more• Complete system warranty• Contributes significantly toward helping your project meet its LEED targets
Click here to learn how the owner saved $4 million dollars on LC Germantown Watch Now
Newport, KY
Scottsdale, AZ
There are tens of thousands of existing buildings in need of more than just exterior repairs and a face lift; many lack sufficient insulation and cost more to heat and cool than a building with an Outsulation® system. That's why we offer ReVyvit by Dryvit: our industry leading renovation solution set. No matter the building type or the level of renovation required, we have a solution to make your building not only perform better and in a less costly way, but look better than it ever has before.
White Bear Lake, MN
West Warwick, RI
Harrisburg, PA
Maple Grove, MN
Newport, RI
Carbondale, IL
Dryvit has been at the center of the exterior cladding renovation business since 1969. Why? Because our ReVyvit by Dryvit renovation program offers a range of renovation solutions: from simply re-coating the existing exterior all the way to a complete over-clad with an Outsulation® system. Whether your building is EIFS or not, we have the perfect renovation solution for you!
The exterior clay brick and stucco cladding of this 20-Year old hotel faced significant issues. The entire exterior, down to the studs, was removed and replaced – while the hotel stayed open. It is a great example of how Dryvit’s ReVyvit Program saved an existing building.
A 100-year old brick building painted a distinctive yellow had long been a sort of odd landmark in the Illinois capital city of Springfield. Located just two short blocks from the looming state capital and surrounded by brick buildings in almost every direction, the luxury Isringhausen BMW car dealership was confronted with a unique design challenge when it decided to renovate.
Dryvit Outsulation can improve aesthetics, increase property value, meet building code requirements and maximize your building's energy efficiency with an attractive return on investment. Outsulation is ideal for both renovation and new construction and offers a wide range of durable finishes to create almost any look you desire. Whether your property is commercial or residential, Dryvit Outsulation provides benefits for you.